The spring brake chamber is generally installed on the rear axle of the car in the rear direction. In order to ensure its usability, during the operation, we had better put the hand brake valve handle to the release brake position, that is, to the spring brake. The dynamic chamber is filled with air pressure, so that it is more labor-saving to turn the brake release bolt. It is very dangerous to disassemble the spring brake chamber, and it should not be disassembled blindly to prevent the large spring from jumping out and hurting people. If it must be disassembled, it should be carried out under the guidance of industry insiders. In addition, the installation should be installed in accordance with the product's instruction manual, so that there will be no errors. The last point is that during the use process, we should regularly check the working conditions and carry out regular maintenance, so as to ensure our products. longevity to maximize the advantage.
chinasand.cc