News

Home / News
Home / News
  • What is the impact on the service life of the T30 single-chamber brake chamber?

    What is the impact on the service life of the T30 single-chamber brake chamber?

    As a vehicle accessory, it is easy to rust and corrode when it is damp, and it will affect the performance of the vehicle when it is severe. Therefore, we must ensure that the vehicle accessories are moisture-proof and perform timely scrubbing to prevent water vapor erosion.In order to prevent

    Read More
  • Why install a power adjustment device on the brake chamber?

    Why install a power adjustment device on the brake chamber?

    First of all, we should understand the braking law of the vehicle. The maximum braking force of the vehicle is limited by the adhesion between the tire and the ground. Braking alone may cause some damage to our vehicle by default. When the braking force is equal to the adhesion, the wheels will stop

    Read More
  • How should the brake chamber be designed?

    How should the brake chamber be designed?

    In the process of production, the brake chamber should be used to overcome the defects in the use of the car, and let our air chamber be standardized. Only in this way can we use it more reasonably.The production of the air chamber manufacturer should be in accordance with the relevant scienti

    Read More
  • What are the structures of the dual-chamber brake chamber?

    What are the structures of the dual-chamber brake chamber?

    The brake air chamber is a clamp clamp diaphragm type. The braking force before and after the odor is different, so the front and rear brake chambers are different in size, but the structure is the same. It consists of air intake, cover, diaphragm, support plate, return spring, housing, push rod, It

    Read More
  • How to check the T30 single-chamber brake air chamber?

    How to check the T30 single-chamber brake air chamber?

    Reasonable observation is very necessary. This can further reduce the maintenance time and prevent further damage to the T30 single-chamber brake chamber. Unscrew the semi-trailer pneumatic connection disconnect switch on the tractor to make it in a ventilated state. Then observe.Of cours

    Read More
  • What are the working characteristics of the different brake chambers?

    What are the working characteristics of the different brake chambers?

    1. Piston brake chamber, its working method is very flexible, and the brake formation generated during braking is also very large, so because the brake formation is relatively long, it will wear out the diaphragm during work. It is also very small, which makes the service life longer.2. G

    Read More
  • How to make the brake chamber no longer vulnerable?

    How to make the brake chamber no longer vulnerable?

    Now when using the brake chamber, our manufacturers should scientifically master the relevant experience, to further ensure that our air chamber is used more reasonably, and to ensure that our accessories have a longer service life, then how should we ensure that it is in use Will no damage occ

    Read More
  • What is the working principle of the brake?

    What is the working principle of the brake?

    When our car is started, air will enter the brake chamber from the air intake. At this time, the accessories inside the chamber will work, and the diaphragm will be deformed under the action of air pressure, so that it is pushed by Kia. Push the push rod down to automatically adjust the rotatio

    Read More
  • What are the factors that cause damage to the air chamber?

    What are the factors that cause damage to the air chamber?

    1. The driving temperature of the vehicle is affected by a certain working environment. If the driving temperature is too high, it will change the working environment and cause the wear and tear between accessories to be affected to a certain extent, so sometimes it will be caused by long

    Read More
  • How to make the braking performance of the car more stable?

    How to make the braking performance of the car more stable?

    The brake air chamber of a car is installed on the car and its braking performance can be adjusted. The braking performance of the car can be changed. Pay attention to the use during driving and master the maintenance skills. Major traffic accidents are often related to situations such as

    Read More
  • How to make the brake chamber more durable?

    How to make the brake chamber more durable?

    Now that the performance of vehicles is constantly improving, we should further improve the quality of vehicle parts when we are producing vehicle parts. We should carry out rational installations when using them. Its role is very critical. Only in this way can it further conform to the c

    Read More
  • What is the difference between a single air chamber and a double air chamber?

    What is the difference between a single air chamber and a double air chamber?

    In the production process of automobiles, in fact, the production is very common. In order to achieve a certain use value, the air chamber manufacturers have also made a lot of efforts. In traditional use, the vehicles are installed with a single layer. Brake chamber, so what is the difference

    Read More
News

Next Page

Views Faq